Select oil fracturing proppant

Maide oil fracturing proppant selection mainly includes the type , size and concentration . Select oil fracturing proppant and the pressure of the rock formations , environmental conditions and yield requirements are closely linked.

Should first consider when selecting proppant Maide ceramic proppant suppliers nature and fracture flow capacity under certain geological, engineering conditions , combined with specific geological conditions ( such as closure pressure , rock hardness , temperature, target layer properties ) selected to meet the engineering conditions ( fracturing fluid nature of pumping equipment ) , and can get a good yield results proppant . Second, you must also consider the economic benefits due to proppant variety, quality and origin conditions differences, there are differences proppant costs must be considered cost-effective , combining economics to analyze the preferred fracturing proppant .

Luoyang maide ceramics Co.,Ltd

Factory Address: Ruyang County Industrial Zone Henan Province,china
Sales Department: 248 Kaiyuan Road,Luoyang City,Henan Province,471200 china
Website:www.maideceramics.com
E-mail:maide@maideceramics.com
Tel:+86 379-65151777
Fax:+86 379-65151555

Petroleum proppant (ceramic sand)

Grains of MaiDe Hydraulic Fracturing Proppants has a high temperature, high pressure, corrosion resistance, high strength, high conductivity, low density, low breakage rate and other characteristics, mainly for deep low-permeability reservoirs, currently the most widely used at home and abroad.
By species classification can be divided into: high sand proppant ---- no pressure consolidation strength, consolidation fast, good permeability, low density; fracturing proppant ---- Anti spit back a high pressure consolidation strength , crushing low permeability, low density; coated MaiDe lightweight proppant---- remarkable resilience and long-term use at temperatures below 232 ℃ formation; quartz sand proppant ---- acid low solubility for fracturing and acidizing support, a higher sphericity and conductivity.
Divided by the anti-crushing strength: 52Mpa (7500psi), 69Mpa (10000psi), 86Mpa (12500psi) three series.
Divided by the volume density: low density, medium density, high density.

What oil fracturing proppant specifications

A, Product Name: sintered bauxite proppant
B, Appearance: 0.45 to 0.90 mm in diameter , spherical
C, mineral composition : corundum , mullite , aluminum titanate , small amounts of other mineral phase and part of the glass phase.
D, the chemical composition : A12O3-30 ~ 70, SIO2 --- 40 ~ 60% , and small amounts of other oxides .
E, Uses : This product is a low permeability oil and gas exploration fracturing special materials , low-permeability oil and gas fields after using ceramic proppant fracturing its oil and gas production can generally be increased several times to several times , is the low permeability oil and gas fields at home and abroad increase the basic measures . The vast majority of medium depth oil and gas fields and low permeability majority, should choose medium density proppant fracturing operations. Therefore, the quality of the sintered density proppant full of great significance for promoting the exploitation of oil and gas output and resources.
G, Product Category:
A, is divided into three categories according to particle size , a category of 1.25 to 0.9 mm in diameter , with a Class A category and a diameter of 0.9 to 0.45 mm 0.45 to 0.225 mm of .
B, by volume, density and resistance to crushing capacity is divided into low-density , medium density , high density three types, namely its anti- closure pressure 52Mpa, 69Mpa, 86Mpa and 103Mpa. That 7500Psi, 10000Psi, 12500Psi and 15000Psi ( pounds / square inch ) .
H, product quality evaluation criteria : the oil and gas industry standards by the People's Republic SY/T5108---1977, hydraulic fracturing performance tests recommended method ....